How it works

1. 1

   Create a project

   Its name and address, the Revit version you work in, and what you need: the model, sheets as PDF or DWG.

2. 2

   Send the scan

   Upload the E57 file here (it resumes if the connection drops), or paste a WeTransfer link. We open it and send you a preview in a few minutes: the scan in 3D, cleaned, its floors.

3. 3

   We build the model

   Start the build when the preview shows the right building. We measure the scan and build the Revit model and its sheets - usually within a day - and check every model before it is sent.

4. 4

   Check it, then download

   See the model in 3D on the project page and tap any wall, door or window for its size. Then pay $0.45 a square foot of floor area (measured on the model) to download the .rvt and the sheets.

What we need from the scan

One registered E57 file

All the scan positions registered together and exported as one .e57 (from ReCap, Cyclone, SCENE, or your scanner's software). Up to 100 GB.

Every room, every side

A position in each room and on each landing, through each doorway, and round the outside on all sides. Rooms we cannot see we cannot model.

The roof, if you need it

A drone scan of the roof merged in the same file gives us its shape; without it we model what the ground positions see.

Colour helps

A scan with colour lets us tell materials apart; without it the model is still measured the same.

Questions about a scan or a project: hello@orkynos.com.